TAROT 130 TL130H1 is a Mini Real-time Transmission FPV Racing Drone with Brushless Motors. It weighs only 138 grams including batteries, inherited the usual Tarot overall design criteria.
It is a ARTF 135mm racer drone and include a 300mW 32CH 5.8G VTX and naze32 compatible FC. You’ll have to supply your own FPV receiver and monitor (or goggles).
The TL130H1 comes with MT1104 / TL150M1 brushless motors, controlled by 6A ESCs.
It comes with Tarot branded components, such as a Standard TL300D flight controller, 3-inch propellers, a TL300MN2 PAL camera (520TVL), TL300N2 5.8GHz 300mW FPV transmitter and an antenna (TL300K4).
Tarot recommends using a 11.1V 3S 35C 450mAh battery.
It’s price is 129.99$ at Gearbest.
TAROT 130 Review
In this videos a quick intro, default settings and test flight:
TAROT 130 Features
Tarot 130 is really small, just 135mm. It has a classic H frame with 2 plates linked with lightweight aluminium standoffs.
Tarot 130 features a full carbon fiber frame design
The LiPo is installed on top of the drone, you can use a 3S 500mAh LiPo for example.
The large port is a PWM receiver port … so for such size, it’s strongly advise to not install some. CPPM or SBUS receivers are much more adapted. Three ports can be found on the rear part of the FC. The right one is the SBUS. By default the servo plug is installed on it. If you plan to install a CPPM receiver, reconnect this cable to the central connector.
ESC are all installed on each arms well protected with heatshrink. No big risk of shortcuts, but it’s strongly advised to secure the installation by “ziptiying” them. The tape have been reported to loose its property versus time especially with the heat free by ESC. 6A 3S ESC flashed with BLheli firwmare.
Motors are 1104 brushless motor 4000KV.
The camera orientation can be ajusted. A simple 520TVL camera installed front housed into the frame. The FOV if the camera is annouced to be 120 degrees.
The FC is seen directly via Cleanfight configuration. As soon as you are installing first associated drivers. Officially, you need the CH340 drivers but CH341 seems to works fine too (same than for Hubsan product for example).
A solid frame much more adapted for racing than the LKTR120. Thanks to its relative light weight, you have in hand a real sporty racer naze32 & cleanflight friendly.
Tarot 130 / TL130H1 FPV game machine level through an extremely delicate novel visual experience, bring through the extraordinary experience.The machine weighs only 138 grams including batteries, inherited the usual Tarot overall design criteria, so many wonderful to ingenuity can be found on this through the machine.
Miniature camera freely adjustable angle design
Strong Brushless Power
Sub-miniature 6A ESC
300mW miniatures biography
Full carbon fiber frame design
Custom shock tripod
Reliable power connection
Lightweight aluminum hexagonal column
Miniature image transmission antenna
FIG CNC metal shell heat transfer
Ties slip design
Compact overall limit
Free flight mode switch
Flight control firmware factory default channel CH5 homeostatic control rack / manual mode
Homeostasis model: flight control LED red light, beep loudly
Manual mode: flight control LED red light off, beep sound
Recommended related equipment:
Race level flight control: Standard TL300D
Brushless motor: Standard MT1104 / TL150M1
Upgraded sold separately MT1106 ( TL150M2 / TL150M3 )
Brushless ESC: Standard 6A ESC / TL300G
Rotor specifications: Standard 3 inch paddle TL150S1 ( 8pcs )
Upgraded sold separately TL150S2
Camera: Standard PAL system TL300MN2
5.8G 300mW wireless image transmission transmitter: Standard TL300N2
5.8G Illustrated antenna: Standard TL300K4
Lithium-polymer battery: 11.1V 35C 450mAh lithium polymer battery TL150A2 ) ( not included )
SBUS or PPM receivers: TL150F1 ( not included )
Empty rack height / assembly height: 19mm / 28mm
Empty frame length / assembly Length: 111mm / 186mm
Empty rack width / assembly width: 123mm / 199mm
Set Weight: 85g
|General||Type: Quadcopter,Racing Quadcopter
Features: 5.8G FPV,Radio Control
Motor Type: Brushless Motor
Functions: Forward/backward,FPV,Turn left/right,Up/down
Material: Carbon Fiber,Electronic Components
Kit Types: PNP
Level: Advanced Level
|Connectivity||Remote Control: Radio Control
Channel: No Transmitter
Mode: No Transmitter
Detailed Control Distance: Unknown
Model Power: 1 x Lithium battery(not included)
|Battery||Battery: 11.1V 35C 450mAh ( Not Included )|
|Camera||Video Resolution: 520TLV
Video Standards: PAL
|Dimension and Weight||Product weight: 0.085 kg
Package weight: 0.234 kg
Product size (L x W x H): 19.90 x 18.60 x 2.80 cm / 7.83 x 7.32 x 1.1 inches
Package size (L x W x H): 20.00 x 20.00 x 4.00 cm / 7.87 x 7.87 x 1.57 inches
|Package Contents||Package Contents: 1 x FPV Drone Set, 1 x Battery Tie, 1 x Battery Magic Sticker, 1 x Manual ( English + Chinese )|
Incoming search terms:
- tarot tl130 review
- 130 drone
- tarot 130 battery