Makerfire is a brand new MICRO FPV 64mm Mini RC Racing Drone, with 5.8G 520TVL FPV, 2.4GHz transmitter, 6-axis Gyro with F3 EVO Flight Controller, Ducted Fan Design.
This small drone is perfect for indoor flight and first person view. It has a 6-axis gyro to stabilized flights.
This small drone offers fascinating FPV experience with high speed and camera tilting up to 10 degrees. Its dimension is just 64mm and its weight 22g, as big as your palm, extremely portable. It features a 5.8G AIO 25mW camera, give you 10°camera angl. You can use your 5.8G goggles to enjoy the FPV experience. Perfect angle for Tiny Whoop flight. At this angle the polit can still see everything ahead in full-blown fast forward flight.
It features F3 EVO with STM32 F303 MCU Flight controller, DSM 8CH receiver, compatible with Spektrum DSM2 DSMX transmitters. F3 EVO brushed flight controller supports CleanFlight and BetaFlight open-source firmwares. F3 EVO flight controller:Fully programmable through Betalfight using the onboard USB port! Tune all the parameters, PID’s, and rates to your perfect settings!
Talking about the motors, it has four 615 high PRM coreless motors that offer you the desirable velocity. Considerably more powerful than almost all of the motors used for Tiny Whoop style aircraft,without encountering considerable oscilations.
It is equipped with a lithium-ion battery 35C with a capacity of 200mAh and 3.7V with Pico JST connector.
It has colorful LED board at the rear that help you to know the direction the drone is flying.
There are two color options: red or green.
You can find the user manual here.
Coupon code for rc products: RC18OFF (18% off discount)
Binding & Flying Procedure
To bind the Makerfire Micro FPV Drone to a Spektrum radio:
a.Click the bind-button when powering on the Drone,either by connecting the battery or USB power.Then the receiver will enter bind mode,indicated by rapid red LED flashing.
b.Now, on the radio, hold the bind-button while powering on the radio (or what it takes to enter bind-mode).
c.The red light on the XRACER should stop blinking when the bind is completed.
d.Only need to bind the radio ONCE.Next time the receiver will bind to the last radio auto.
More info here: http://www.crazepony.com/products/mkf-micro-fpv.html
Main Features:
– DSM 8CH receiver, compatible with Spektrum DSM2 DSMX transmitters
– 615 high PRM coreless motors offer you the desirable velocity
– Fascinating FPV experience with high speed and camera tilting up at 10 degree
– 5.8G 40CH 25mW video transmitter, 520TVL camera with 120 degree FOV NTSC / PAL switchable
– F3 EVO brushed flight controller supports CleanFlight and BetaFlight
– 3.7V 200mAh 35C lithium-ion battery
– 64mm, 22g, as big as your palm, extremely portable
– Colorful LED board at the rear helps to know the direction
– Ducted fan design effectively reduces the air resistance
– Plug-in modular design, namely, soldering is unnecessary
Coupon code for rc products: RC18OFF (18% off discount)
Specifications:
Flight controller: F3 EVO with STM32 F303 MCU
Receiver: DSM 2.4GHz 8CH
Video transmission: 5.8G 40CH 25mW
Video resolution: 520TVL
Receive distance: 300m
Motor: 615 coreless motors with 65000 RPM
Battery: 3.7V 200mAh 35C
Flight time: about 5 minutes
Charge time: 30 minutes
Charging method: USB
Additional gimbal installation: not feasible
Specification
| General | Brand: Makerfire Type: Frame Kit |
|---|---|
| Racing Quadcopter Parameters | Wheelbase: 64mm |
| Motor | Model: 615 CW / CCW: CCW,CW |
| Camera | Video Resolution: 520TVL Video Standards: NTSC,PAL |
| Battery | Battery (mAh): 3.7V 200mAh 35C Flying Time: about 5mins Charging Time (h): 30 minutes |
| Dimension and Weight | Product weight: 0.022 kg Package weight: 0.380 kg Product size (L x W x H): 6.40 x 6.40 x 4.00 cm / 2.52 x 2.52 x 1.57 inches Package size (L x W x H): 25.00 x 20.00 x 15.00 cm / 9.84 x 7.87 x 5.91 inches |
| Package Contents | Package Contents: 1 x Drone, 1 x 3.7V 200mAh 35C Lithium-ion Battery, 1 x English Manual |
